The following table lists all the devices and corresponding actions required to connect devices to the RCS-430 Hardware Hub.
Connecting Devices to the Hardware Hub
| Device Name | Capture Device | Remarks |
| HDMI | PCI Capture | Use the HDMI to DVI adaptor, and connect to the DVI port of the capture card. |
| SDI | PCI Capture | Use a BNC cable to connect to the BNC connector on the capture card |
| DVI | PCI Capture | Use the DVI cable to connect to the DVI port of the capture card |
| VGA | PCI Capture | Use the VGA to DVI adapter and connect to the DVI port of the capture card. |
| COMPONENT | PCI Capture | Use the break out cable and connect to the capture card. |
| COMPOSITE | PCI Capture | Use the break out cable and connect to the capture card. |
| S-VIDEO | PCI Capture | Use the break out cable and connect to the capture card. |
| USB Camera | USB | Plug in the USB device to the USB port. |
| USB Microphone | USB | Plug in the USB device to the USB port. |
| 3.5mm line out, RCA line out, XLR line out | Line In | Plug in the 3.5mm line out to the Line In. |
| Microphone out | Microphone In | Plug in the 3.5mm mic out to the Microphone In. |